Watch the first five minutes of almost any video meeting in a conference room and you will see the same scene. Someone is waving at the camera. Someone else is asking whether the sound is working. A third person is searching for the right button on a remote that nobody has used since the last vendor visit. The meeting has not started yet, and the people on the other end of the call are already losing patience. In most cases the cause is not the software. It is the room, the placement of the equipment and the lack of a simple check before anyone joins.

I set up a lot of small-office conference spaces, and the fixes are less expensive than people expect. Here is what I focus on, in the order I focus on it.

Fix the Audio Before Anything Else

People will tolerate a soft picture far longer than they will tolerate choppy or echoing sound. A microphone placed too far from the speakers, a speaker aimed straight at a microphone or a room full of hard surfaces can turn a simple discussion into an unpleasant one. Place the microphone where the people speaking will be, usually in the center of the table, and keep it away from air vents and the speaker. Test with a person sitting at the far end of the table, because that is where echo and quiet voices show up first.

Place the Camera for the People Who Speak Most

Camera placement is more about framing than resolution. The camera should sit at roughly eye level for the person at the head of the table, and it should show the whole group without cutting off people at the edges. A window behind the speaker will turn them into a silhouette. Blinds, a light on the ceiling or a lamp on the table can fix that.

Run a Test Call Before the First Meeting

Every room should have a standing test routine. Before the first meeting of the day, someone joins a test call from a phone or laptop outside the room and asks three questions. Can you hear the room clearly? Can you see everyone who is speaking? Can you hear the remote person when they speak back? If any answer is no, fix it before the meeting starts. The test takes two minutes and saves ten.

Share the Screen Without Drama

Screen sharing is where many meetings stall. Confirm which input the display uses, whether the room supports wireless sharing and whether the laptop needs a cable. Make sure the person presenting knows how to share a single window instead of the entire desktop, so private email does not appear on the big screen.

Keep the Room on a Wired Connection

Conference room equipment should use a wired network connection whenever possible. A room that depends on a crowded Wi-Fi network can drop out in the middle of a call, and the people who notice first are the remote attendees. Ask whoever manages your network to place the room equipment on a dedicated wired port, and check that the switch and cable serving the room are in good condition. A loose cable behind a credenza is one of the most common causes of mysterious drop-outs I have seen.

Match the Equipment to the Room

A four-person huddle room does not need the same system as a boardroom that seats fifteen. Buying equipment designed for a much larger space wastes money, and it can make small rooms sound worse because the microphones pick up too much. Start with the number of people who usually attend, the shape of the table and the amount of noise in the hallway or next door. Ask the vendor to explain how the equipment handles those conditions, and ask for a demonstration in a room that looks like yours.

Post a One-Page Room Guide

A short guide taped near the display saves more time than any training session. Include how to start a call, how to share a screen, how to turn the microphone on and off, and who to contact when something fails. Add the phone number for support and the name of the person responsible for the room. Update the guide whenever the equipment or the software changes. A guide that describes a system you replaced last year is worse than no guide at all.

Keep a Log of Problems

Write down every failed call, every dead microphone and every mystery drop-out. Note the date, the time, the people involved and what fixed it. Patterns show up quickly. A problem that happens every Tuesday afternoon may point to a schedule conflict on the network. A microphone that fails only when the door is open may have a loose connection. The log turns scattered frustration into a short list of things to check.

If your conference room calls keep starting late, a short walkthrough by someone who understands both the room and the network can usually find the cause in one visit. Our managed IT support page describes how DirecTech monitors and supports business systems, and the team can take it from there. Run the test call tomorrow morning before anyone walks in. Fixing the first five minutes is the cheapest improvement many offices will make all year.

Danielle Lemons is Vice President of Operations at DirecTech Connect, where she oversees phone, IT and support operations for small and mid-sized businesses. You can also find her work at daniellelemons.com.